Section 2: Equipment
2.1 Stick
- Maximum shaft length: 163 cm (64 in) from the heel of the blade to the end of the shaft.
- Blade length: 25–32 cm (9.8–12.6 in).
- Blade width: 5–7.5 cm (2–3 in).
- Blade curvature: Maximum 1.5 cm (0.59 in) measured from a straight line between the toe and heel of the blade.
- Goalkeeper stick: Wider blade permitted — maximum width 9 cm (3.5 in) for the lower 71 cm (28 in) of the shaft.
- Material: Wood, composite, or combination. No sharp edges or dangerous protrusions permitted (Rule 32, IIHF).
2.2 Skater Protective Equipment
- Helmet: IIHF-approved helmet with full face protection (cage or full visor) mandatory for all skaters. Chin strap must be fastened at all times on ice.
- Body protection: Shoulder pads, elbow pads, hockey gloves, shin guards, hockey pants (breezers), and athletic cup/jock. All protective equipment must be worn under the jersey.
- Neck guard: Recommended for skaters, mandatory for goalkeepers.
- Mouthguard: Recommended but not mandatory under IIHF rules.
2.3 Goalkeeper Equipment
- Leg pads: Maximum width 28 cm (11 in). Maximum length measured from centre of the knee to the boot: proportional to the goalkeeper's body. No rigid external attachments that extend the blocking surface beyond pad dimensions.
- Catching glove (trapper): Maximum width 23 cm (9 in) measured across the widest point. Maximum length 41 cm (16 in).
- Blocker: Flat rectangular pad attached to the stick hand. Maximum dimensions: 28 cm × 38 cm (11 in × 15 in).
- Chest and arm protector: Must not exceed the goalkeeper's body contour by more than specified tolerances when arms are at sides.
- Mask: Full-face mask/helmet combination mandatory. Must meet IIHF certification standards for puck impact resistance.
2.4 Puck
- Material: Vulcanised rubber, solid black.
- Diameter: 7.62 cm (3 in).
- Thickness: 2.54 cm (1 in).
- Weight: 156–170 g (5.5–6 oz).
- Preparation: Pucks are frozen before use to reduce bouncing and ensure consistent play. Fresh frozen pucks are supplied throughout the game.